YAMAHA- POWERED MIXERS - EMX312SC

YAMAHA-  POWERED MIXERS - EMX312SC

Experienced musicians, performers, speakers, and club operators know the importance of a high-quality sound system with the right features and performance to deliver their sound. Where portability and convenience are important criteria, a system based on a high-performance Yamaha EMX-series powered mixer is definitely the way to go. In one integrated, portable unit you have a mixer to combine and balance your microphone and instrument and line sources, effects to refine and polish your sound, and power to drive the main speakers and even monitor speakers as well. But that's nowhere near the whole story - Yamaha EMX-series Powered Mixers offer a range of features that let you mix, process, and deliver your sound with maximum quality and creative control … and, of course, that unrivalled Yamaha sound.

Brand: Yamaha
Product Code: EMX312SC
Reward Points: 1130
Availability: In Stock
Price: AED 2,260.00
Price in reward points: 22600
Qty:  
   - OR -   

Features

All-in-one for Easy Operation and Fast Setup

The EMX-series powered mixers integrate mixer, power amplifier, graphic EQ, and digital effects into a compact, portable unit. No need for complex setup and wiring — simply plug in and play! The entire system is optimized, so it's easy to get great sound just about anywhere.

Superior Sound through Painstaking Design and Parts Selection

Parts selection is crucial to achieving the best possible sound, and Yamaha spares no effort in selecting the best. The critical head amplifier circuit, for example, uses special low-noise chip resistors that are deposited on a thin film of nichrome for accurate, noise-free reproduction. Special care has also been taken in laying out the system's grounding as well as the circuitry in general to ensure that no unwanted noise or interference degrades the quality of the sound.

Intuitive, Functional Controls and Connectivity

The mixer section offers a total of 12 inputs in a very versatile configuration: channels 1 through 4 are mono microphone or line inputs, channels 5/6 and 7/8 can function either as mono microphone/line inputs or stereo line inputs, and channels 9/10 and 11/12 are stereo line inputs. Connectors are also provided for connection to external power amplifiers and effect processors. Stereo channels 9/10 and 11/12 include phono jacks for direct connection of CD players or other music playback devices, to which the 3-band channel equalizers can be applied as required. There are also two 7-band graphic equalizers that can be used to match speaker and/or room response for optimum sound.

Built-in SPX Effects

Yamaha's SPX effects are widely recognized as being some of the finest available for both recording and live sound. The EMX-series powered mixers feature an SPX effect processor built in, delivering extraordinary effect quality with 32-bit processing. 16 effect programs with adjustable parameters give you top-quality digital reverb, echo, delay, modulation, and distortion.

High-efficiency Power Amplifiers

To make the EMX-series powered mixers light and manageable, the power amplifiers used must be extremely efficient while providing superior sound quality. In fact, the EMX power amplifiers are remarkably efficient, delivering high power with relatively low power consumption and heat generation. At the same time they deliver outstanding audio quality with excellent transient response and low distortion. Power output from all models is quite impressive: 500W + 500W from the EMX512SC, 300W + 300W from the EMX312SC, and 220W + 220W from the EMX212S.

Lightweight, Practical Design

In the EMX series reduced weight does not mean reduced performance. The cabinet is formed of a special lightweight-but-rugged material, while a switching power supply delivers all the clean power the system needs. The power amp itself has also been refined for outstanding sound, extra high efficiency, and reliable performance. The cabinet design allows normal or angled placement for improved visibility and access.

Uncompromising Reliability and Safety Standards

The EMX-series powered mixers not only meet worldwide safety and electronic emission standards, but they are also subject to more than sixty rigorous internal Yamaha tests that guarantee the highest possible level of reliability.

Forced Air Keeps the System Cool Even in Difficult Conditions

Airflow can be compromised when a powered mixer is rack mounted, and direct sunlight in outdoor applications can raise temperatures to dangerous levels. The EMX-series mixers feature a forced-air cooling system that has been custom-designed for each model to ensure reliable operation and high performance even under difficult conditions.

New Compressor Circuit on the EMX512SC and EMX312SC

Each mono input channel on the EMX512SC and EMX312SC features an advanced compressor circuit that lets you achieve the ideal degree of compression with a single knob. Setting up optimal compression for a source is usually a complicated process, but this unique compressor makes it easy to achieve "musical" compression for enhanced vocal or guitar sound.

Practical Utility Features

The Yamaha FCL (Feedback Channel Locating) system makes locating and eliminating feedback easier than ever. FCL indicators provided on each input channel indicate which channel feedback is occurring in, so you can identify it visually and adjust levels or EQ as required. Another handy features is a Standby switch that mutes channels 1 through 8 so that, for example, after rehearsal or between sets you can mute performer's inputs 1 through 8 without having to change fader settings, while stereo inputs 9 through 12 remain active for background music playback. There's even a footswitch connector that will accept an optional FC5 footswitch for effect on/off control.

Yamaha Speaker Processing

Yamaha Speaker Processing provides optimized matching with Yamaha Concert Club series, BR series or AX series speakers, for clean, solid reproduction that will deliver your music with maximum impact.

Power Amp Mode Selector

The power amp mode switch allows the internal power amplifiers to be configured in a variety of ways. A simple switch setting allows you to set up the ideal main and monitor output configuration for your application.

Optional Rack Mount Hardware

The EMX-series mixers can be conveniently rack mounted using the optional RK512 rack-mount kit.

 

General Specifications

Maximum Output Power @ 0.5 % THD at 1 kHz 300 W/4 Ω; 190 W/8 Ω
Frequency Response -3, 0, 1 dB 20 Hz-20 kHz, ref to the nominal output level @ 1 kHz
Total Harmonic Distortion Less than 0.5 % (THD+N) +14 dB @ 20 Hz, 1 kHz, 20 kHz, GAIN control: all nominal
Hum & Noise Equivalent Input Noise, -115 dBu, Rs = 150 Ω CH 1-4 MIC/LINE: MIC
Crosstalk -65 dB @ 1 kHz
Input Connectors CH 1-4: XLR and Phone; CH 5/6, 7/8: XLR and Phone; CH 9/10, 11/12: XLR and Pin
CH EQ HIGH, MID, LOW
Phantom Power 15 V
Graphic Equalizer 7 Band (125, 250, 500, 1 k, 2 k, 4 k, 8 kHz): Main (Stereo) and Monitor
Digital Effects SPX Digital Multi Effector (24 bit AD/DA, 32 bit Internal Processing): 16 Programs
Power Amp Mode Main L/R, Main (L+R)/Monitor
Foot Switch On/Off
Dimensions (W x D x H) 442 x 274 x 286 mm (17-3/8" x 10-3/4" x 11-1/4")
Weight 10 kg (22 lbs.)
Power Requirements 120 V 60 Hz
Power Consumption 400 W


INPUT CHARACTERISTICS

Input Terminals MIC/LINE Actual Load Impedance For Use With Nominal Input level
Sensitivity *2 Position Max. before clip
CH INPUT 1-4 XLR
*3
MIC 2 kΩ 50-600 Ω Mics -60 dBu
(0.69 mV)
-35 dBu
(13.8 mV)
-15 dBu
(138 mV)
  LINE -30 dBu
(21.8 mV)
-5 dBu
(436 mV)
+15 dBu
(4.36 V)
  Phone
*4
MIC 6 KΩ 600 Ω -50 dBu
(2.18 mV)
-25 dBu
(43.6 mV)
-5 dBu
(436 mV)
  LINE -20 dBu
(69.0 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
CH INPUT 5/6, 7/8 XLR
*3
- 2 kΩ 50-600 Ω Mics -60 dBu
(0.69 mV)
-35 dBu
(13.8 mV)
-15 dBu
(138 mV)
  Phone
*5
- 10 KΩ 600 Ω Lines -20 dBu
(69.0 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
CH INPUT 9/10, 11/12 XLR
*3
- 2 kΩ 50-600 Ω Mics -60 dBu
(0.69 mV)
-35 dBu
(13.8 mV)
-15 dBu
(138 mV)
  RCA
Pin
- 10 KΩ 600 Ω Lines -20 dBu
(69.0 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)

*1 0 dBu is referenced to 0.775 Vrms.
*2 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (All level controls are at
maximum position.)
*3 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*4 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*5 Phone Jacks are unbalanced.



OUTPUT CHARACTERISTICS

Output Terminals Actual Source Impedance For Use With Nominal   Output level Connector
Nominal Max. before clip
SPEAKER OUT 0.1 Ω 4 Ω Speakers EMX512SC 125 W 500 W [A1, B1] SPEAKON
[A1, A2, B1, B2] EMX312SC 75 W 300 W [A2, B2] Phone Jack *2
  EMX212S 50 W 200 W  
MAIN OUT [L, R] 600 Ω 10 kΩ Lines - +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
EFFECT OUT 600 Ω 10 kΩ Lines - +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
MONITOR OUT 600 Ω 10 kΩ Lines - +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
REC OUT [L, R] 600 Ω 10 kΩ Lines - -10 dBV (316 mV) +10 dBV (3.16 V) RCA Pin Jack

*1 0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms. 
*2 Phone Jacks are unbalanced.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



M4Music