Presonus Temblor T10 - (Single)

Presonus Temblor T10 -  (Single)
Please scroll down to find the related products

The bottom line is great sound.

To hear what’s really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor® T8 and T10 let you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.

Brand: Presonus
Product Code: Temblor T10 - (Single)
Reward Points: 800
Availability: In Stock
Price: AED 1,599.00
Inclusive of 5% VAT
   - OR -   

Compare Temblor Subwoofer Models

The Temblor™ T8 and T10 are similar in many respects. The T10 is designed primarily for studio use. While also suitable for the studio, the T8’s input/output configuration and general design make it a particularly good choice for use with small monitors such as the PreSonus® Ceres™ BT-series and Eris E4.5 full-range speakers and in home stereo and home theater systems.



Temblor T8

Temblor T10

Transducer 8”, downward firing 10”, front-firing
Acoustic Port Rear-firing bass reflex (round) Front-firing bass reflex
Input Gain Control Yes Yes
Variable Lowpass Filter Yes Yes
Built-In Crossover Yes Yes
Switchable Highpass Filter Yes Yes
Momentary Footswitch (Bypass) No Yes
Polarity Invert Yes Yes
Ground-Lift Switch No Yes
Class AB Amplification 200W 250W
Main Inputs
  • 2- Balanced ¼” TRS
  • 2- Unbalanced RCA
  • 2- Balanced XLR
  • 2- Balanced ¼” TRS
  • 2- Unbalanced RCA
Main Outputs
  • 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
    2- Unbalanced RCA (full range with 80 Hz HPF option)
  • 2- Balanced XLR (full range with 80 Hz HPF option)
    2- Balanced ¼” TRS (full range with 80 Hz HPF option)
Subwoofer Output (connect a second subwoofer) 1- Balanced XLR


10.2” (260 mm) 12.6” (320 mm)


12.6” (320 mm) 15.75” (400 mm)


11” (280 mm) 15.75” (400 mm)


21.2 lbs (9.6 kg)

39.46 lbs (17.9 kg)

Main components

  • T8: 8-inch, downward-firing, glass-composite low-frequency transducer
  • T8: Round, rear-firing, bass-reflex acoustic port
  • T10: 10-inch, front-firing, glass-composite low-frequency transducer
  • T10: Front-firing, bass-reflex acoustic port

​Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • T10: Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • T10: Ground-lift switch

Power and safety

  • T8: 200 watt, Class AB amplification
  • T10: 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement

Inputs and outputs

  • T8: Left and right, balanced ¼” TRS and unbalanced RCA main inputs
  • T10: Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • T8: Left and right, balanced ¼” TRS and unbalanced RCA outputs
  • T10: Left and right balanced XLR and ¼” TRS outputs 
  • T10: XLR subwoofer output for connecting a second T10


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:


Related Products