Presonus Temblor T8 -(Single)

Presonus Temblor T8 -(Single)

The bottom line is great sound.

To hear what’s really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor® T8 and T10 let you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.

Brand: Presonus
Product Code: Temblor T8 -(Single)
Reward Points: 650
Availability: In Stock
Price: AED 1,299.00
Price in reward points: 12990
Qty:  
   - OR -   

Compare Temblor Subwoofer Models

The Temblor™ T8 and T10 are similar in many respects. The T10 is designed primarily for studio use. While also suitable for the studio, the T8’s input/output configuration and general design make it a particularly good choice for use with small monitors such as the PreSonus® Ceres™ BT-series and Eris E4.5 full-range speakers and in home stereo and home theater systems.

 

 


Temblor T8


Temblor T10

MAIN COMPONENTS    
Transducer 8”, downward firing 10”, front-firing
Acoustic Port Rear-firing bass reflex (round) Front-firing bass reflex
FEATURES    
Input Gain Control Yes Yes
Variable Lowpass Filter Yes Yes
Built-In Crossover Yes Yes
Switchable Highpass Filter Yes Yes
Momentary Footswitch (Bypass) No Yes
Polarity Invert Yes Yes
Ground-Lift Switch No Yes
Class AB Amplification 200W 250W
INPUTS AND OUTPUTS    
Main Inputs
  • 2- Balanced ¼” TRS
  • 2- Unbalanced RCA
  • 2- Balanced XLR
  • 2- Balanced ¼” TRS
  • 2- Unbalanced RCA
Main Outputs
  • 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
    2- Unbalanced RCA (full range with 80 Hz HPF option)
  • 2- Balanced XLR (full range with 80 Hz HPF option)
    2- Balanced ¼” TRS (full range with 80 Hz HPF option)
Subwoofer Output (connect a second subwoofer) 1- Balanced XLR
PHYSICAL    

Width

10.2” (260 mm) 12.6” (320 mm)

Depth

12.6” (320 mm) 15.75” (400 mm)

Height

11” (280 mm) 15.75” (400 mm)

Weight

21.2 lbs (9.6 kg)

39.46 lbs (17.9 kg)

Main components

  • T8: 8-inch, downward-firing, glass-composite low-frequency transducer
  • T8: Round, rear-firing, bass-reflex acoustic port
  • T10: 10-inch, front-firing, glass-composite low-frequency transducer
  • T10: Front-firing, bass-reflex acoustic port


​Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • T10: Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • T10: Ground-lift switch


Power and safety

  • T8: 200 watt, Class AB amplification
  • T10: 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement


Inputs and outputs

  • T8: Left and right, balanced ¼” TRS and unbalanced RCA main inputs
  • T10: Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • T8: Left and right, balanced ¼” TRS and unbalanced RCA outputs
  • T10: Left and right balanced XLR and ¼” TRS outputs 
  • T10: XLR subwoofer output for connecting a second T10

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



M4Music